You can use your smart phone to browse stories in the comfort of your hand. Simply browse this site on your smart phone.

    Using an RSS Reader you can access most recent stories and other feeds posted on this network.

    SNetwork Recent Stories

Ascot Exploration Drilling Intersects 17.29 g/t Gold Over 3.58 Metres in New Area West of Premier Portal

by ahnationtalk on December 5, 201988 Views

Vancouver, B.C. December 5, 2019 — Ascot Resources Ltd (TSX: AOT; OTCQX: AOTVF) (“Ascot” or the “Company”) is pleased to announce high-grade gold results from exploration drill holes completed in a potential discovery to the west of the Premier deposit near Stewart, British Columbia.

Highlights of this release include:

  • 17.29g/t Au over 3.58m in hole P19-2177
  • 12.83g/t Au over 4.20m in hole P19-2177
  • 15.30g/t Au over 1.0m in hole P19-2180

In its news release from November 7, 2019, the Company announced a gold intercept in a geotechnical drill hole (P19-2166, 9.70g/t Au over one metre) that was drilled at the site of a proposed portal site at the Premier deposit. Subsequent to the intercept, the Company assigned a drill rig to investigate the extent of mineralization in the area. This release is reporting the results from the ten (10) follow-up drill holes.

Derek White, President and CEO of Ascot commented, “These results demonstrate the near-term potential to expand our high-grade resources to the west of the known resources at Premier. This area now ranks as a high priority area for exploration as the prospect of adding resources close to existing and planned infrastructure is highly appealing. This potential discovery will certainly be an area of focus for exploration in the new year.”

Drill Results

This news release presents follow-up results to a high-grade gold intercept in geotechnical drill hole P19-2166. Ten drill holes were completed from two separate drill pads with eight of the holes drilled from the same pad as hole P19-2166 (pad GT-PM-1, see figure1). The holes were targeted to determine both the orientation and possible extent of the mineralization.

Holes P19-2167 and P19-2168 were drilled with a more northerly azimuth (55 and 60 degrees respectively) than hole P19-2166 and intercepted silver rich mineralization that is anomalous in gold. This could be the expression of zonation in the epithermal system. The historical Premier workings close to surface were reportedly very rich in silver with silver grades decreasing at depth. Hole P19-2177 hit three zones of high-grade gold in the 140m-170m depth range. These intercepts are located in the projected extension of the 602/609 zones.

Hole P19-2172 hit three zones of gold mineralization southwest of the projected trend of known mineralization. Importantly there is no previous drilling in the area. The results from these drill holes highlight the potential to add more resources to the Premier deposit in an area where mineralization may have been offset by faults or rotated to a different orientation.

Further work, including wireframing and geological interpretation will be completed to determine the relationship and possible connection of this newly discovered mineralization to existing resources further east (602/609 zones).

The drill results are summarized in Table 1 and the pad locations are listed in Table 2.

Figure 1  Image of the Premier mine area showing the location of the drill pads relative to current resource outlines and the existing infrastructure. Pad locations are listed in Table 2.

Table 1 Summary of exploration drill results from Premier

Hole # pad azimuth/dip From
(m)
To
(m)
Width
(m)
Au
(g/t)
Ag
(g/t)
P19-2167 GT-PM-1 55/-8 24.00 25.00 1.00 0.45 193.0
P19-2168 GT-PM-1 60/-30 27.00 33.00 6.00 0.50 311.0
incl. 31.00 32.00 1.00 1.07 916.0
also 45.00 46.00 1.00 1.15 16.0
P19-2172 GT-PM-1 85/-30 151.00 153.00 2.00 3.30 26.0
also 159.00 161.00 2.00 6.13 6.5
and 168.00 173.00 5.00 3.72 9.2
incl. 168.00 169.00 1.00 5.20 7.0
P19-2174 GT-PM-2 60/-40 No significant intercept
P19-2175 GT-PM-1 85/-45 105.00 107.00 2.00 1.94 4.0
also 202.75 203.88 1.13 9.69 11.0
and 225.00 227.00 2.00 2.71 4.0
P19-2176 GT-PM-1 85/-60 No significant intercept
P19-2177 GT-PM-1 60/-45 138.17 141.75 3.58 17.29 62.8
incl. 139.17 140.17 1.00 32.40 138.0
also 154.50 158.94 4.44 9.63 20.8
incl. 155.50 156.50 1.00 14.10 29.0
and 168.30 172.50 4.20 12.83 37.9
incl. 168.30 169.30 1.00 38.50 125.0
P19-2178 GT-PM-1 60/-60 No significant intercept
P19-2179 GT-PM-1 105/-45 141.07 143.00 1.93 4.25 16.0
P19-2180 GT-PM-2 90/-50 159.45 164.52 5.07 3.51 6.5
incl. 163.45 164.52 1.07 8.50 14.0
also 209.09 210.09 1.00 15.30 18.0
and 229.45 231.45 2.00 3.17 11.0
and 233.68 234.95 1.27 4.17 8.0

True width is uncertain as the orientation of the mineralized zones has not been determined sufficiently. The drill holes that are missing in the sequence have not been drilled at Premier and will be reported in subsequent releases.

Table 2 Drill pad locations

Pad # UTM N UTM E Elevation Hole no.
GT-PM-1 6212682 436162 321 2167, 2168, 2172, 2175-2179
GT-PM-2 6212805 436175 305 2174, 2180

Quality Assurance/Quality Control

Lawrence Tsang, P. Geo., the Company’s Senior Geologist provides the field management for the Premier exploration program. John Kiernan, P. Eng., Chief Operating Officer of the Company is the Company’s Qualified Person (QP) as defined by National Instrument 43-101 and has reviewed and approved the technical contents of this news release.

Analytical work is being carried out by SGS Canada Inc (“SGS”). Ascot’s quality-assurance and quality-control program includes the use of analytical blanks to monitor for cross contamination, certified reference material standards to assess analytical accuracy, and duplicate samples to quantify sampling precision. This is in addition to the internal quality assurance program employed by SGS.

Samples are dried and weighed by SGS. They are then crushed to 75% passing 2mm, with 250g split and pulverized to 85% passing 75µm. Samples are processed on site by a mobile lab supplied by SGS and run by SGS personnel. All splits are sent to SGS in Burnaby. There, all samples are digested using aqua-regia with an ICP-AES finish and fire assay with AA finish for gold. Samples over 100ppm silver are digested with aqua regia and then volumetrically diluted before an ICP-AES or AA finish (up to 1,500ppm). Samples over 1,500ppm silver are fire assayed with a gravimetric finish. Samples over 10ppm gold are fire assayed with a gravimetric finish. Identified or suspected metallic gold or silver are subjected to “metallics” assays. Sampling and storage are at the Company’s secure facility in Stewart.

For more information about the Company, please refer to the Company’s profile on SEDAR at www.sedar.com or visit the Company’s web site at www.ascotgold.com, or for a virtual tour visit www.vrify.com under Ascot Resources.

ON BEHALF OF THE BOARD OF DIRECTORS OF
ASCOT RESOURCES LTD.

“Derek C. White”, President and CEO

For further information contact:
Kristina Howe
VP, Investor Relations
778-725-1060 / khowe@ascotgold.com

NT4

 

Send To Friend Email Print Story

Comments are closed.

NationTalk Partners & Sponsors Learn More

CLOSE
CLOSE